|
The
Training Courses
Other
Training Packages
ITSSAR
INSTRUCTOR TRAINING
Our own pages
| |
|
Lorry Loader Training?
(Click Here) |
Thomas Truck Training Ltd
Thrapston House, Huntingdon Rd, Thrapston
Northamptonshire NN14 4NF |
PHONE +44 (0)
1832 731261
or 0845 644 8365 (local rate)
Central Fax ( +44) 0 1908 598408 |
bigH@3ttt.info |
Instructor Training &
Re-register Courses to
ITSSAR Training standard
|
Instructor Courses
-
10 day
novice Instructor course
-
4/5 day
Instructor re-registration
-
5 day
direct entry
-
5 day
Method of Instruction
-
In-house Instructor
|
|
Thomas Truck Training ltd is accredited under the Independent
Training Standards Scheme and Register (ITSSAR) to arrange
and deliver
professional Instructor training at a
training centre in Northamptonshire. Upon successful completion of the course
candidates will be able to provide effective instruction on the
following:
-
Relevant
instructional skills, including classroom techniques
-
Techniques for structuring training material into logical
sequence
-
An
objective and critical approach towards the effectiveness of
the instruction presented
-
Appropriate methods of assessment on the progress of
trainees and the testing of basic skills and knowledge they
acquire;
-
Must
hold recognised accredited forklift
operator certification no older than 5 years prior to the course
commencement.
-
Course monitored by ITSSAR, and operated under
continual assessment. Making certain that you have
to achieve every day to gain your instructors
ticket.
- entered on
the ITSSAR national register
- This
qualification is valid for 5 years..
|
|
We have organised a
choice of B&B ranging in the region of £25-£40 per night
To make an enquiry you can use the enquiry
service or just E mail me on
Bigh@3ttt.info
or why not just ring me on 01832 731261 any reasonable time |
Further FLT Instructor
Development
(After initial training)
Introduction
It has become noticeable, that
upon successful conclusion of an Instructor Training Course,
many recently qualified Instructors need further help to
commence delivering Training Courses.
TTT ltd have
identified three areas within which newly qualified instructors
or their employers may benefit from further assistance.
-
Delivery of Practical Courses
-
Setting up and putting into
place Course work and records
-
Safe FLT working systems to
ensure compliance with Legislation
What we can do to help
TTT ltd can offer
an Instructor Development Programme aimed at recently qualified
or existing FLT Instructors, enabling them to deliver FLT
training, compliant with the requirements of the Approved Code
of Practice (L117).
There is an indicial set up fee of
£200 Which will give all the information required to
successfully conduct FLT training at your site and will include
any videos and individual training aids as required. As well as
individual set up of In-House certificates and back up paperwork
with manual record keeping that could be transferred to
computer.
How it is done
-
The opportunity for an
Instructor to shadow one of our team over a relevant FLT
course of 1,3 or 5 days duration. (This would be on-site).
-
Attendance by the course tutor
for the full duration of the 1st course on your
site. Enhancing the varied elements undertaken on the course
and assisting the company to ensure correct procedures are
used and records are kept. At a cost of £175
per day.
-
Training Package: containing:-
Ø All relevant course material, i.e.
Test Sheets, Theory Papers. Training record sheets &
Instructor/Company Guidance Notes.
Ø
PowerPoint presentations for Health
& Safety.
Ø
Candidate course notes and course
handout. |
|
Instructor
Qualities
A good Instructor will need to adopt an
enthusiastic approach to every lesson, will thoroughly research
the subject matter, simplify the difficult areas to be taught
and set a good example by a confident attitude and a fair, firm,
but friendly approach to the trainee operators and will always
endeavour to see each problem through the eyes of the individual
members of the course. This should be borne in mind when
selecting potential instructors.
|
|
|
ADDITIONAL
INFORMATION |
COURSE
CONTENT:
-
Truck
Familiarisation and Testing
- Health & Safety at Work Act
- Approved Code of Practice
- Setting up and conducting Skills tests
- Analysing test results
- Basic report writing
- Certification and Authorisation
Qualities of a Good Instructor
Principles of Instruction-
Preparation and Planning
Motivation
Confirmation,
Task Analysis and Planning Lessons
Practical lessons
Selection and use of visual aids
Classroom Lessons
Question and answer technique
|
TRAINING
METHODS
The course is highly participative and candidates will
be expected to take part in all activities as the award
of the qualification is based mainly on assessed
performance. Throughout the course the candidates'
progress will be assessed and he/she will receive
regular feedback.
QUALITY
Our Course tutor
is a very experienced industrial
trainer who has successfully trained many new
instructors to the standards required by ITSSAR and
other accrediting bodies.
To gain the qualification the candidate must pass 8
examinations-
1,2+3 Knowledge examinations based on the course
content.
4. Conduct a classroom lesson
5. Conduct a practical demonstration
6. Conduct a practical lesson
7. Construct and conduct a practical test
8. Write an end of course report
These examinations are scheduled at
various stages during the course and time is available
for further practice and retakes if necessary.
All examinations are assessed by the course tutor and
during the course the tutor will be monitored by an
ITSSAR monitor to ensure the necessary standards are
being met.
Entry Qualifications.
All candidates must be experienced operators and
must hold an operators certificate issued by a
registered Instructor within the twelve months preceding
the course.
We are able to offer advice regarding the selection of
suitable candidates and carry out the necessary pre
course testing if required. |
|
In House
Courses
These courses are normally attended by
prospective, or established in company instructors that will
only be instructing for their sponsor company
Successful candidates from this course can
instruct, examine and issue certification within their sponsor
company sites only. The instructor certification remains with
the sponsor company and once the instructor ceases employment he
/ she cannot continue as an instructor. Any certification
issued by the in company instructor, to employees, remains with
the sponsor company and is not transferable if employees leave
the sponsor company’s employ.
Certification is issued for 5 years and
instructors must then attend a recognised re-registration course
to continue training.
These courses would normally be undertaken
at the company’s site encompassing the company’s equipment,
operating environment, systems and policies. We are also able
to offer these courses at a training centre if required.
For the more Specific
Technical Details Please click
Here |
Click on a pick to make it bigger.
|
