At the training school
WINSFORD

COURSES AVAILABLE
C/Balance Forklift  B1
Reach Truck           D1

P Pallet Truck        A2
P Truck Hand        Z1
All Refreshers

Operator Conversions
RELATED COURSES
Operator Assesmt
Corporate Packages
Forklift Supervisor

1st Aid Training

Rent out the training school


On-Site Training
Warehouse

COURSES AVAILABLE
C/Balance Forklift  B1
                           B2
Reach Truck         D1

P Pallet Truck   A2-A3
Hand P Truck         Z1
Rough Terr     Fix   J1
Rough Terr     9m  J2
            above 9m  J3
   Pivot  Bend/Flex P
Refreshers (All kinds

Operator Conversions
SPECIALIST EQUIPMENT COURSE
Scissor Lift
Lorry Loader (HIAB)
Slinger/Signaller

Overhead Crane
Hand Grinder

FLT Cage Lifting

RELATED COURSES
Operator Assessment
In House Instructors
Corporate Packages
Forklift Supervisor

1st Aid Training

Construction


Mini Digger


Dumper


Scissor lift

££ Price List ££

Publication

Training Manuals

 

Daily/Weekly Check Books

 

ADDITIONAL INFO
On-site Training
 --
Frequent Asked
Questions

 --

 Testimonials


Our own pages

 Contact Us


We travel the country

Thomas Truck Training Ltd
 Offices in ........
 The Potteries and The Midlands

The Potteries
PHONE +44 (0) 1270 505824
The Midlands
PHONE +44 (0) 1832 731261

 
Skype Me™!

                                           Counterbalanace Individual operators course  3day Semi-Experanced   £450 +VAT  @ our site in Northwich Cheshire                                                                                                                  

Safe Operating Procedures for
 Cage Lifting Operations


Safety Awareness Course
All types of applicable Lift Trucks

Here is the major change for use of cages as extracted from the new Note PM28. (Non Integrated)
There is a free down load pdf file link at the bottom of this article.

OCCASIONAL USE
12. The Work at Height Regulations 2005, regulation 7(2)(b) places a duty on employers to select the most suitable work equipment for the task to be carried out regardless of the duration of the task. Nevertheless, it is foreseeable but unacceptable that people will often use unsafe methods of access to height for short duration and occasional tasks. For example, a substantial number of serious accidents occur when people are lifted on the forks or a bucket and on pallets or stillages placed on the forks of fork lift trucks. To encourage safer working practices, in these exceptional circumstances, occasional use of non-integrated working platforms with forklift trucks is allowed in the UK in accordance with this guidance note. This occasional use is allowed in the UK but may not be allowed in some other EU member states. As such, there is NO free movement of non-integrated working platforms throughout the EU and they MUST NOT be CE marked.

Examples of occasional use are..

  • a. non-routine maintenance tasks for which it is impractical to hire in purpose built access equipment,

  • b. the replacement of light fittings in high rise warehouses if the task is not carried out as part of periodic maintenance operations

  • c. tasks that would otherwise be carried out using less safe means of access such as ladders, because it is impractical to hire in purpose designed people lifting equipment due to the short duration and occasional nature of the task, e.g. clearing a blocked gutter d. checking on high-level damage to racking suspected of causing an immediate risk or checking on the condition of damaged roof lights.

14. Routine or planned tasks particularly those associated with production or pre-planned activities, such as periodic maintenance or stocktaking, are not exceptional circumstances and are thus not examples of occasional use. Generally, non-integrated work platforms do not provide as high a level of safety as purpose built access equipment. Consequently, forklift trucks fitted with non-integrated working platforms are not suitable for order picking, routine maintenance or the transfer of goods or people from one level to another.

Training
34. People expected to work on platforms and truck operators shall be aware of the restricted uses given in paragraphs 13 & 14. They should be properly trained and given full instructions on safe systems of working with platforms, including the action to be taken in the event of an emergency and the dangers associated with leaning out of the working platform.

Health and Safety at Work etc Act 1974
77.The Health and Safety at Work etc Act 1974 (HSWA) places duties on employers and persons who have control of premises to ensure the safety of their employees and others who may be affected by their work activities. A risk assessment of any work at height shall be carried out under the Management of Health and Safety at Work Regulations 1999. The assessment shall identify the measures needed to comply with all relevant legislation applicable to the intended work at height.
.No Responsibility accepted for the accuracy of this article  (8/9/05)

 pdf file (Size 158k ) Note PM 28
The course is suitable for:-  up to three trainees who must already be skilled and experienced (minimum 6 months) lift truck operators.
    • Basic course objectives
    • By the end of the course operator will:
    • be aware of the need for operator communication between driver and cage rider
    • know the responsibilities and legal duties operators have to themselves and others when operating the cage.
    • be able to identify and safely attach the cage to the lift truck.
    • know how to check the load centre for your cage and that all the relevant plated information that is stated is correct
    • know how to identify safe operating positions and heights for use with the cage along with operator protection and coning off of a safe working area.
    • able to select traction aids and operate correctly over wet and/or rough ground with loaded pallets/bucket attachments
    • Prepare and take the appropriate written test to complete the course test.
       
    • Each Operator will receive:
    • Copy of Note PM28 (Second Edition)
    • Pocket card of communications techniques
    • Certificate of attendance
 
 Course Time Table        (This is only a strong guide)
Period 1 2 3 4 5 6

½ Day 

Introduction. to Course

Health and Safety
Confirmation (Note PM 28 (Second Edition))

Written knowledge conformation test.

Operating and lifting procedures

Practical Assessment & Course Wind up

 

TTT ltd is is able to offer a Basic and Refresher Training courses for companies who need to establish a working team around the operation of a lifting cage attached to a lift truck. With the changes going from advisory to must both in the LOWLA and Working with Heights Code of Practice issued by the HSE there is a strong requirement to risk asses all jobs on the ground and if this can't be achieved then a safe operating procedure at height needs to be put in place. If that is to use a cage on a lift truck then there is a need then to provide training and supervision for that operation and of course the proof that the personnel that is using the kit are properly trained for that.
We offer a half day course for up to 3 operators at your premises using your cage and lift truck. It fully covers the HSE Note PM 28(Second Edition) and of course include the amended as published. This addition will be an amendment of the second to take into account the changes in the working at height directives.     
O
n successful completion a safety awareness certificate will be issued.

Hit Counter